Wide 5 Re-Threading Tool

YOU CAN LOOK IN THE KEYWAY NOTCH TO SEE IF THE THREAD IS IRREGULAR
   

THREAD TOOL IS 1 13/16” X 16 UN


Our adapters are made to screw onto the spindle all the way in and bottom against the bearing (the nut has to come off). 

If our TLT adapter DOES NOT screw all the way on your spindle thread is NOT the same I.D.  

If this happens you need to send us ALL your spindles and we have a special die that we can use to re-thread all your spindles.

OR… You can purchase the spindle re-threading tool below from us.
 

  Click here to order
   



CLICK HERE for pricing

Contact us for more info